Race Ramps Portable Pit Stop
From Race Ramps:
Our Portable Pit Stop Ramps make maintenance a breeze – track-side or back home in your own garage. You can quickly and easily assemble the multi-piece ramp and drive your vehicle right on up. Once there, you can remove the center ramp pieces, opening up considerable space for working under the car and maneuvering around. Toss those cumbersome jacks and unstable jack stands: you can safely and quickly get under your car with the Portable Pit Stop Ramps.
The ramp platforms can accommodate a wheel base from 90″ to 115″ wide. They have an approach angle of 10 degrees and raise the vehicle 14″ high. Each piece is 16″ wide and the total assembled length is 18.5 ft.
The Portable Pit Stop Ramps are 100% solid, made with a high-density expanded polystyrene that is coated with a hybrid polyurea. This patented process results in a product that is extremely lightweight, yet strong and durable. This solid construction makes the Portable Pit easy to transport and store. The pieces total 250 lbs. on each side, but no single piece weighs more than 40 lbs. and together they can support a vehicle weighing up to 6,000 lbs. They are small enough to fit in the trunk or backseat of most cars (stacked straight up, the total dimensions of the pieces are 65″ x 88″ x 14″). The ramp components will not slide, scratch, or otherwise damage any floor type.
The Portable Pit Stop Ramps come in a standard model and a racer model. The racer model has removable cutouts large enough to fit a scale that is 15″ wide and 2.5″ tall, while the standard does not have cutouts.
If your vehicle is really low to the ground, be sure to check out the XTenders, which decrease the angle of approach to only 6.8 degrees.
Track-side maintenance has never been so fast or simple. Routine maintenance and detail work becomes fun with this set-up. Display is spectacular and easy.